CGV Ventanas

A corner flat is located at the end of the building: that is, part of its walls are not adjacent to the neighbors, however are the outer walls of the house.

There might be one apartment in a corner apartment – it occupies the entire end of the house, it is likewise known as a corner flat. Or 2 – domikday.ru the windows of one forget the road, the second – the yard. Is based on the building plan, the layout of the assumptions.

There is also a»separate caste» – housing with walls at the expansion joints. Such»gaps» between entrances are typically made in multi-story buildings, the most important task of the unit – to break the deformation forces during the shrinkage of the building, in the event of emergencies. Pros and cons of both corner flats at the joint are slightly different from the typical ones with access to the street – we’ll pay special attention to this subject in the previous section.

Infection

Considering that the 2-3 sides of this room is outdoors, in winter it is 3-5C colder, and in summertime on the opposite – hotter. Especially if the conclusion of the home is heated by the sun. In some cases, the gap reaches 10C – but such a difference is unacceptable, indicates that a problem with the exterior the house – most probably have to contact the management business, requesting (or forcing) to fulfill their direct duties, to spot the cracks formed.

Corner flat in a brick home with thick walls is more comfortable. Such dangers are not subjected – the thickness of the wall functions as a buffer, not letting overheating, overcooling.

Humidity

When an area has just one wall combined with the street, it usually has enough space heat to avoid freezing and condensation. But when there are two outside partitions, and they’re adjacent – there’s a higher probability of freezing at the corner, the formation of condensation inside, and therefore – mould, fungus. Their spores not only spoil the appearance of the space, but also cause the look, complication of many serious ailments.

Important! The problems of corner place are justified when the factors are associated – also low temperature from heating batteries together with dampness is sure to result in moldy walls.